|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
Halo Coil Spring, Includes: (4) Coil Replacement Springs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HV4-HR02AC-RM is a line voltage remodel housing constructed from aluminum and is corrosion-resistant for damp locations. Provided with flexible BX cable and J-box cover for use in soffits. This housing is convertible to new construction with the use of additional accessories.
|
Coilex tapered plastic baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recessed mounting clips for use with all FORUM LED panels. Allows panels to be installed in wood, drywall or metal. They are ideal for use in spaces where recessed mounting is not possible.
|
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules.
|
Full cone baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High brightness, diffusing, optical quality lens. Easy installation with universal mounting clips. Wet and damp location listed and IC (insulated ceiling) rated. Over 600 lumens. Compatible with 4" standard recessed housings: HALOr, ALL-PROr and more. 50,000 hours with 70% maintained lumens. White plastic baffle trim.
|
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Highlight your furniture with this recessed ceiling light trim kit. The recessed lighting will work well in low to medium ceiling heights, applications are virtually universal including living and dining areas, kitchens, bedrooms, hallways, and bathrooms. Template and Instructions Included for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recessed baffle trim is white and features dimmable, 2700K warm white light with 600 lumens, 8.5 W. LEDs included; no bulbs to replace. Use with 4 in housing. Minimum starting temperature 0??F. Rated for wet location, IC Rated for direct contact with insulation. 5-year Limited warranty, cETL/ ETL/ Energy Stars Listed.
|
Recessed baffle trim is white and features dimmable, 4000K bright white light with 700 lumens, 10 W. LEDs included; no bulbs to replace. Use with 5 and 6 in housing. Minimum starting temperature 0??F. IC Rated for direct contact with insulation. 5-year Limited warranty, cETL/ ETL/ Energy Stars Listed.
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5ICAT is designed for use in insulated ceiling applications. This is an Air-Tite? housing and may be used to meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7T is for use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3 in from all sides of housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enjoy all the benefits of advanced LED energy-saving technology with the 50 W Feit Electric 4 in recessed downlight. This recessed downlight will fit most 4 in recessed cans, includes a 3000K warm white light that is dimmable and will replace a 50 W equivalent incandescent bulb. It produces a similar light output (540 Lumens), uses 9 W of electricity and up to 82% less energy than a standard incandescent light bulb. Get instant on to full brightness with relatively cool running performance. Feit Electric recessed downlights have an average life of 50,000 hrs/45.7 years and are RoHS compliant. It is easy to install, comes with a standard base adapter and a pre-mounted trim. Choose a dependable Energy Star approved recessed downlight for residential or commercial applications.
|
Energy-efficient LED replacement for incandescent reflector lamps with integrated trim that updates the look of recessed lighting in one single solution. This easily installed lamp delivers energy savings up to 77% and is available in a warm 2700K color temperature.
|
The SYLVANIA ULTRA RT5/6 is a 5 and 6 in compatible LED recessed downlight kit creating high performing white light and is optimized for new construction and retrofit applications. Installation is done quickly and easily in most standard 5 or 6 in Insulated Ceiling (IC) housings, Airtight (AT) housings and non-IC housings. The adjustable gimbal features a smooth travel from nadir to a 30 deg tilt, making it suitable for slanted ceilings and wall wash. The gimbal's friction blade design allows the downlight to be installed in any position within the housing aperture and the 360 deg horizontal rotation capability of the gimbal head offers easy aiming and adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RT is suited for use in non-insulated existing ceilings. Housing slips through opening in ceiling. If ceiling insulation is present, it must be kept 3 in from all sides of housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal baffle trim for use with the H5 Series housings. Trim includes dual-position socket supports for BR, R and PAR lamps.
|
With tilting gimbal trim. For use in insulated ceilings. Requires 1 x 50 W GU10 bulb (included). Includes housing, directional trim and bulb.
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing.
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICAT housing is designed for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
The SMD6 surface mount downlight is an easy-to-install "down light" solution for any location in home or office. Mounts quickly into an existing junction box using the included TwistFit mounting bracket. The SMD6 can also retrofit into many existing 5 and 6 in cans. This 7-1/2 in Dia fixture duplicates the appearance of a traditional 6 in recessed downlight.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-insulated with pheonlic stepped baffle trim. Uses one 65 W BR30 or 75 W PAR30L bulb, (not included). For use in insulated ceilings. Includes housing and directional trim. 9 in W x 5-1/4 in H.
|
Non-insulated with pheonlic stepped baffle trim. Uses 1 x 65 W BR30 or 1 x 75 W PAR30L bulb, (not included). For use in insulated ceilings. Includes housing and directional trim. 9 in W x 5-1/4 in H.
|
ETI Downlight, 120 V, Lamp Base: E26, Lamp Type: LED, Lamp Wattage: 8 W, Recessed Mounting, Average Life: 50,000 hr, Lumens: 625 Lumens, Color Temperature: 2700 K, Color Rendering Index (CRI): 80, Recessed Can Diameter: 4 in, Dimmable: Yes, Dimensions: 1-5/8 in H x 4-7/8 in W, Temperature Rating: - 4 to 113 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Color Preference? retrofit downlights offer 3 CCT options, 3000K, 4000K or 5000K. Selectable before or after installation. Reduces inventory hassle and investment at the same time meeting the users exact lighting requirements.
|
Recessed baffle trim is white and features dimmable, 4000K bright white light with 600 lumens, 8.5 W. LEDs included; no bulbs to replace. Use with 4 in housing. Minimum starting temperature 0??F. Rated for wet location, IC Rated for direct contact with insulation. 5-year Limited warranty, cETL/ ETL/ Energy Stars Listed.
|
For use in insulated ceilings. No trim. Requires 1 x E26 medium base bulb (not included). 7-1/2 in W x 7-1/2 in H.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Color Preference? retrofit downlights offer 3 CCT options, 3000K, 4000K or 5000K. Selectable before or after installation. Reduces inventory hassle and investment at the same time meeting the users exact lighting requirements.
|
The ETi 30-in-1 color preference retrofit downlights offer the flexibility and performance to meet the requirements of any job. With 5 CCT selectable, 3 Lumen brightness settings, plus 2 trim/baffle color 30 different configurations. The 30-in-1 downlight reduces inventory investment since 1 SKU can replace multiple SKUS as well as offering the customer the ability to fine tune color and brightness for each installation location.
|
Enjoy all the benefits of advanced LED energy saving technology with the 2 per pack 45 W Feit Electric 4 in InstaTrim retrofit kit with adjustable neck design. This kit will fit most 4 in recessed can housing, includes a 2700K soft white light that is dimmable and will replace a 45 W equivalent incandescent bulb. It produces a similar light output of 540 Lumens, uses 9 W of electricity and up to 80% less energy than a standard incandescent light bulb. Get instant on to full brightness with relatively cool running performance. Feit Electric retrofit kits have an average life of 25,000 hrs or 22.8 years. Each kit comes with a standard base adapter and a pre-mounted trim.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt.
|
Liteline Recessed Combo, Includes: RF405 Housing, GR-WH-TH18R Trim and LMP16E26AC-50-BX Halogen Lamp
|
Insulated with tilting 4 in gimbal trim. New construction, directional trim. 1 x 50 W PAR20 bulb Included. 7-7/8 in W x 5-3/4 in H.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The spring loaded clips clamp the fixture to the finished ceiling. Perfect for residential and commercial lighting applications.
|
LED surface mount downlight. Dimmable, showerlight. Fits most J-boxes and recessed housings. 3000K, 50000 average life hours.
|
Halo BLD6 Recessed Lighting Trim, Lumens: 800 Lumens, Recessed Can Diameter: 6 in, White, Temperature Rating: 3000 K, Includes: Torsion Spring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SMD6 surface mount downlight is an easy-to-install "down light" solution for any location in home or office. Mounts quickly into an existing junction box using the included TwistFit mounting bracket. The SMD6 can also retrofit into many existing 5 and 6 in cans. This 7-1/2 in Dia fixture duplicates the appearance of a traditional 6 in recessed downlight.
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
The spring loaded clips clamp the fixture to the finished ceiling. Perfect for residential and commercial lighting applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
ETI SSL's 4 in canless recessed can downlight with integral J-box is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture has no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Equipped with our Color Preference? Technology to choose between five color temperatures of light at install. The 4 in canless recessed can downlight emits 814 Lumens of light while using only 11.7 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any damp locations. The 4 in canless recessed can downlight includes certifications to both Energy Star? and the California Appliance Efficiency Database under JA8 that can be used to comply with California Title 24 Part six high-efficacy LED light source requirements.
|
Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99ICAT is a small aperture IC AIR-TITE? housing for accent and task lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE? housing designed to prevent air flow between living spaces and unconditioned areas.
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trim ring with phenolic baffle, 7-1/4 in OD, for use with 6 in housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill Sku number 140.7022. Sleeved.
|
Our offering of recessed downlight retrofits provides high-quality replacements for traditional incandescent and halogen downlights reducing both energy consumption and maintenance. The addition of Color Preference? technology to some items allows the installer to select the color temperature through a switch on the unit.
|
No driver, quick and easy-to-install. White with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Showerlight trim with gasketed non-conductive corrosion-resistant polymer trim ring. Drop dome frosted glass lens.
|
ETI SSL's 3 in LowPro recessed downlight with Color Preference? and nightlight is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture offers three unique features first, there is no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Second, you can choose between five color temperatures of light output for your space from warm to cool whites, bright white and daylight. Third, the nightlight produces a soft, amber hue when activated from your wall switch. The 3 in LowPro recessed downlight emits 561 Lumens of light while using only 9.06 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any wet locations. It is maintenance-free with no need to replace bulbs and is IC Rated for direct contact with insulation.
|
ETI Color Preference Edge-Lit Downlight, 120 V, Wattage Rating: 8.5 W, Ballast Type: Dimmable, Triac, Average Life: 50,000 hr, Lumens: 450 Lumens, Color Temperature: 2700, 3000, 4000, 5000 K, Recessed Can Diameter: 3 in, Dimmable: Yes, Temperature Rating: -13 to 104 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Halo LA4 LED Adjustable Downlight series are adjustable LED modules for 4 in aperture recessed downlights. The LA4 gimbals feature adjustment of 35 deg tilt and up to 360 deg rotation. The lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added savings and code compliance.
|
No driver, quick and easy-to-install. Brushed nickel with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
No driver, quick and easy-to-install. White with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Air-Tite? frosted dome lens with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
ETI SSL's 4 in LowPro recessed downlight with Color Preference? and nightlight is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture offers three unique features first, there is no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Second, you can choose between five color temperatures of light output for your space from warm to cool whites, bright white and daylight. Third, the nightlight produces a soft, amber hue when activated from your wall switch. The 4 in LowPro recessed downlight emits 649 Lumens of light while using only 9.6 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any wet locations. It is maintenance-free with no need to replace bulbs and is IC Rated for direct contact with insulation.
|
ETI SSL's 6 in canless recessed can downlight with integral J-box is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture has no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Equipped with our Color Preference? Technology to choose between five color temperatures of light at install. The 6 in canless recessed can downlight emits 960 Lumens of light while using only 14.3 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any damp locations. The 6 in canless recessed can downlight includes certifications to both Energy Star? and the California Appliance Efficiency Database under JA8 that can be used to comply with California Title 24 Part six high-efficacy LED light source requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RL56 SeleCCTable is a complete LED baffle trim module for 5 and 6 in aperture recessed downlights suitable for new construction, remodel and retrofit installation. Adding convenience, a field selectable color temperature switch allows users to chose between five different color temperatures for the desired application need. The lens provides uniform illumination. Precision design makes any housing airtight for added savings and code compliance.
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
HALO BLD4 Downlight, 120 V, 0.087 A, Wattage Rating: 10 W, Trim Type: Surface Mount, Lamp Base: E26 Edison Screw, Lamp Type: LED, Surface Mounting, Ceiling Type: Recessed, Average Life: 50000 hr, Lumens: 800 Lumens, Color Temperature: 2700, 3000, 3500, 4000, 5000 K, Color Rendering Index (CRI): 90, Aluminum, Bright White/Daylight/Neutral White/Soft White/Warm White, Dimensions: 6-3/16 in Dia x 7/8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Halo Backlit LED Downlight (BLD) incorporates state of the art lighting technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. BLD6 is designed for installation in many 3-1/2 in and 4 in round or octagon junction boxes including pancake boxes. It can also retrofit in 5 in or 6 in aperture IC and non-IC recessed housings. Suitable for residential or commercial installations.
|
ETI Color Preference Edge-Lit Downlight, 120 V, Wattage Rating: 11 W, Ballast Type: Dimmable, Triac, Average Life: 50,000 hr, Lumens: 650 Lumens, Color Temperature: 2700, 3000, 4000, 5000 K, Recessed Can Diameter: 4 in, Dimmable: Yes, Temperature Rating: -13 to 104 deg F
|
Adjustable eyeball trim for 120 V line voltage 4 in H99 family recessed housings. Eyeball has 30 deg tilt and can be rotated 360 deg. Eyeball and die-cast trim ring available in a variety of finishes. Three cat's paw springs secure trim in housing. Integral trim socket with screw in plug to housing socket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations.
|
No driver, quick and easy-to-install. Brushed nickel with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
The NightLight downlight adds a nightlight feature to a traditional LED downlight retrofit. The 2000K nightlight provides a warm, diffuse glow on the ceiling surface. The traditional down light and nightlight can be easily controlled through the use of the room's on/off light switch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A complete ultra-thin direct mount down light that chooses the color temperature directly on the fixture. Choose between 5 color temperatures ranging from warm (2700 K) to daylight (5000 K) prior to installing in ceiling. For use in new construction, remodel and retrofit installation, without needing a housing or j-box. LED driver offers 120 volt dimming capability. The HLB4 lens provides uniform illumination in wet location listing. HALO matte white finish with textured lens to provide smooth light distribution. Fixture is built to last with maintenance-free energy efficient LEDs with 50,000 hours of light. IC rated, for direct contact with insulation. Airtight, wet rated, can be used in shower and outdoor light applications. 1/2" depth for use in shallow ceilings. Fits into applications with as little as 3.5" plenum clearance.
|
ETI Color Preference Edge-Lit Downlight, 120 V, Wattage Rating: 15 W, Ballast Type: Dimmable, Triac, Average Life: 50,000 hr, Lumens: 900 Lumens, Color Temperature: 2700, 3000, 4000, 5000 K, Recessed Can Diameter: 6 in, Dimmable: Yes, Temperature Rating: -13 to 104 deg F
|
ETI SSL's 6 in LowPro recessed downlight with Color Preference? and nightlight is one of the most versatile and easiest ways to upgrade your existing recessed lights to energy-efficient LEDs. This innovative fixture offers three unique features first, there is no need for recessed cans or a separate J-box, so its ultra slim design easily installs into low clearance or sloped ceilings. Second, you can choose between five color temperatures of light output for your space from warm to cool whites, bright white and daylight. Third, the nightlight produces a soft, amber hue when activated from your wall switch. The 6 in LowPro recessed downlight emits 895 Lumens of light while using only 14.3 W of electricity. The fixture is dimmable, down to 10% without any flickering or buzzing and is suitable for any wet locations. It is maintenance-free with no need to replace bulbs and is IC Rated for direct contact with insulation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Liteline Recessed Combo Kit, 120 VAC, Trim Type: Shower, Lamp Base: E26 Medium, Lamp Type: MR16 Halogen, Lamp Wattage: 35 W, Housing Type: New Construction, Insulation Type: Non-Insulated, Recessed Mounting, Ballast Type: Dimmable, Average Life: 2500 hr, Lumens: 650, Color Temperature: 2800 K, Recessed Can Diameter: 4 in, Trim Color: White, Dimmable: Yes, Includes: RF405 Housing, HV4-TH4013-WH Shower Trim and LMP16E26AC-35-BX Lamp, 35 W Max
|
Direct mount. Does not require recessed housing or junction box. Delivers up to 1,100 lumens. 2700, 3000, 3500, 4000 and 5000 K field selectable CCT. 6" ultra-thin LED lens down light with remote driver. Wet location listed for showers and protected ceilings. Dimmable with 120 volt dimmers.
|
Liteline Recessed Light Kit, Specifications: 8 W Wattage, 120 V Voltage, 500 Lumen Light Output, 3000 K Color Temperature, 110 deg Beam Angle, 90 CRI Color Rendering Index, 50,000 hr Average Life, Multi-Color, Dimensions: 4 in Dia, Suitable for: 4 in Can, Standard Octagon Box, Includes: Black, Silver, White Trims
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Halo RL4 deep baffle is a complete LED baffle-trim module for 4 in aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.
|
The RLD deep baffle Series is a complete LED baffle-trim module for 4 in (RLD4) or 6 in (RLD6) aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black coilex baffle included and is wet location. Precision construction makes any housing airtight for added savings and code compliance.
|
Enjoy all the benefits of advanced LED energy-saving technology with the 50 W Feit Electric 4 in recessed downlight. This recessed downlight will fit most 4 in recessed cans, includes a 3000 K warm white light that is dimmable and will replace a 50 W equivalent incandescent bulb. It produces a similar light output (540 Lumens), uses 9 W of electricity and up to 82% less energy than a standard incandescent light bulb. Get instant-on to full brightness with relatively cool running performance. Feit Electric recessed downlights have an average life of 50,000 hr/45.7 years and are RoHS Compliant. It is easy to install, comes with a standard base adapter and a pre-mounted trim. Choose a dependable Energy Star approved recessed downlight for residential or commercial applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. Lamp socket and trim can be adjusted 20 degrees laterally for compound slope ceilings or to compensate for off axis aiming. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-3/8"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1-1/4"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
ETI Downlight with Night Light Trim, 120 V, Wattage Rating: 11 W, Trim Type: Triac, Lamp Base: E26 Medium, Lamp Type: LED, Insulation Type: IC, Recessed Mounting, Ballast Type: Dimmable, Average Life: 50,000 hr, Lumens: 670, Color Temperature: 2700, 3000, 3500, 4000, 5000 K, Color Rendering Index (CRI): 90, Recessed Can Diameter: 6 in, White, Dimmable: Yes, Dimensions: 3-1/4 in Dia x 7-1/2 in L
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
|
|
Request a Quote
