Home > POWER TOOLS & ACC > AIR COMPRESSORS, TOOLS & ACCES > COMPRESSORS & ACCESSORIES
Choose a sub category:
AIR COMPRESSORS AIR TOOLS AIR TOOL ACCESSORIES
AIR COMPRESSOR HOSES AIR COMPRESSOR HOSE FITTINGS BLOW GUNS
AIR COMPRESSOR ACCESSORIES SPRAY GUNS AIR TANKS
Sort By:
Page of 3
Tru-Flate 21-515 Air Line Coupling Tru-Flate 12-325 Air Line Plug Tru-Flate 12-125 Hose Plug
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends. This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve. The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 12-335 Air Line Plug Tru-Flate 21-595 Hose Adapter with Ball Socket
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve. All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
Tru-Flate 12-135 Air Line Nipple Tru-Flate 21-147 Air Hose Fitting Stanley THREADTAPE Thread Sealant Tape
TAPE SEALANT THREAD
Our Price: $3.49
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect. All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. Properly seals all male threaded connections to prevent air leaks.
Tru-Flate 21-143 Air Hose Fitting Plews 21-557 Drain Cock Tru-Flate 21-535 Air Hose Bushing
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion-resistant brass. All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
Tru-Flate 21-222 Air Hose Fitting Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 12-603 Air Line Plug
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
Tru-Flate 12-605 Air Line Plug Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 21-133 Air Hose Fitting
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect. All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 21-505 Air Line Coupling REDUC BSHG M 3/8-1/4IN 2/PK
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends. TOPRING Pipe Reducing Bushing, Nominal Size: 3/8 x 1/4 in, MNPT x FNPT Connection, Brass
TAPE TEFL STANDARD 1/2X480IN  Tru-Flate 21-242 Air Hose Fitting Tru-Flate 12-425 Air Line Plug
TOPRING Sealing Tape, Standard, 12 m L, 12 mm W, PTFE Backing All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules. This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Tru-Flate 12-537 Air Hose Plug Tru-Flate 12-435 Air Line Plug
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-235 Air Line Plug Plews/Edelmann 12-611  Air Compressor Hose Fittings
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
Stanley 38M-14M Hex Reducer Nipple HB 1/4IN SPLICER 2/PK         PLUG COMPR M-STYLE 1/4IN MALE
Connects FPT to FPT. Use thread sealant tape on all male threads for air-tight connections. TOPRING Hose Splicer, Nominal Size: 1/4 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass TOPRING Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel
PLUG COMPR M-STYLE 1/4IN F    Stanley TIRE-14F Tire Chuck NPL HEX 1/4IN M 2/PK
TOPRING Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, 100 psi Plated steel; corrosion resistant steel for long life. TOPRING Hexagonal Hose Nipple, Nominal Size: 1/4 in, MNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
NPL HEX 1/4IN F 2/PK          Tru-Flate 41-300 Hose Repair Kit Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck
TOPRING Hexagonal Hose Nipple, Nominal Size: 1/4 in, FNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass Contains all parts necessary to repair a direct air line hose assembly. Each kit contains one single foot air chuck, 1/4 in female NPT, one male hose end 1/4 in ID hose x 1/4 in NPT, one hose splicer, 1/4 in ID hose, three band style hose clamps, fits 3/8 in ID hose. Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Stanley AP-38F Auto Hose Adapter Stanley AP-38M Auto Hose Adapter BARB HOSE 1/4X1/4IN MALE 2/PK
AUTO PLUG 3/8IN FPT
Our Price: $6.69
PLUG AUTO 3/8IN MPT
Our Price: $6.79
Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. TOPRING Hose to Pipe Splicer, Nominal Size: 1/4 in, Barb x MNPT Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass, Nickel
PLUG 3/8IN TF X 3/8IN FNPT    HB 3/8IN SPLICER 2/PK         PLG COMPR 1/4IN MINI 2/PK
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect. TOPRING Hose Splicer, Nominal Size: 3/8 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass TOPRING Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: CEJN 320 European Type Couplers
PLUG ARO210 1/4IN F 2/PK      PLUG ARO210 1/4IN M 2/PK      ProSource FDQ910 Inflation Kit
TOPRING ARO 210 Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers TOPRING ARO 210 Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers ProSource Air Inflation Kit, Brass/Steel, Brass/Silver, Brass/Nickel Plated, Includes: Inflation Adapter, Tapered Inflation Nozzle, Inflation Needle and Tire Nozzle
Tru-Flate 13-235 Industrial Air Line Coupler CHUCK DUAL FOOT FEMALE 1/4IN  Blaster 16-ATL Air Tool Lubricant
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. TOPRING Air Chuck, Dual Foot, Nominal Size: 1/4 in, FNPT Connection, Steel, 6 in L B'LASTER air tool lubricant lubricates and protects internal tool parts. It ensures maximum tool performance, prevents unnecessary maintenance and also protects tool parts from high-speeds and shock loads.
Tru-Flate 13-225 Air Line Coupler MANIFOLD AIR COMPR 1/4IN F    BARB HOSE 3/8X1/4IN MALE 2/PK
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. TOPRING Air Compressor Manifold, Nominal Size: 1/4 in, FNPT Connection, Brass, Nickel TOPRING Hose to Pipe Splicer, Nominal Size: 3/8 x 1/4 in, Barb x MNPT Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass, Nickel
Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male Tru-Flate 12-527 Air Line Plug
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
REDUC HEX M 1/4-3/8IN 2/PK    CHUCK AIR FEMALE 1/4IN        Tru-Flate 13-135 Air Line Coupler
TOPRING Hexagonal Reducing Bushing, Nominal Size: 1/4 x 3/8 in, MNPT x FNPT Connection, Brass TOPRING Ball Foot Air Chuck, Ball Foot, Nominal Size: 1/4 in, FNPT Connection, Brass The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
Tru-Flate 12-705 Air Line Plug Tru-Flate 13-125 Air Line Coupler COUPLER COMPR ACC TEE 1/4IN F
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect. The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect. TOPRING Pipe Tee, Nominal Size: 1/4 in, FNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
Tru-Flate 13-201 Coupler/Plug Set Stanley IC-14M Industrial Hose Adapter Plews/Edelmann 41-101 Air Tool Oilers
This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Prevents burn-out, stops rust and increases torque up to 25%. A compact oiler that fastens directly to the air tool. Precisely meters proper amount of oil to the tool only when the tool is in use. NO adjustments necessary 1/4 in male NPT outlet, 1/4 in female NPT inlet. Use on all 3/8 and 1/2 in air impact guns, air wrenches, body shop air tools and pneumatic hammers. Note: never use motor oil in pneumatic tool.
Tru-Flate 17-355 Snap Clip On Air Line Chuck PLG COMPR 1/4IN F 2/PK        KT TOOL CONN 1/4IN 2PC
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. TOPRING Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Steel, Zinc, Suitable for: 3/8 Trueflate Type Plugs TOPRING Tool Connection Kit, Nominal Size: 1/4 in
Tru-Flate 13-335 Air Line Coupler COUPLER COMPR ACC 1/4IN FEMALE Stanley IC-14F Industrial Hose Adapter
INDUST.COUPLR 1/4IN FPT
Our Price: $10.29
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve. TOPRING Coupler, Nominal Size: 1/4 in, FNPT Connection, Brass
COUPLER COMPR ACC 1/4IN MALE  Bostitch BTFP72327 Ball Drain Valve Tru-Flate 13-325 Air Line Coupler
BALL VALVE DRAIN 1/4NPT
Our Price: $10.49
TOPRING Coupler, Nominal Size: 1/4 in, MNPT Connection, Steel "Turn ball type drain valve. 1/4"" NPT male thread." This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
KT REPR HOS 3/8IN 7PC         COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT
TOPRING Hose Repair Kit, Nominal Size: 3/8 in, Includes: (1) 1/4 in Hose Barb Splicer, (2) 1/4 in IND to 1/4 in Male Pipe and (4) Hose Clamps From 5/16 in to 7/8 in Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm. Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.
Plews/Edelmann 18-603 Air Blow Guns Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler KT REPR HOS 1/4IN 7PC
Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in coupler bodies. TOPRING Hose Repair Kit, Nominal Size: 1/4 in, Includes: (1) 1/4 in Hose Barb Splicer, (2) 1/4 in IND to 1/4 in Male Pipe and (4) Hose Clamps From 5/16 in to 7/8 in
OIL TOOL AIR 500ML            PLUG SWIVEL COMPR MALE 1/4IN  Stanley Industrial IHKIT-14F Hose Coupler Kit
TOPRING Air Tool Oil, Net Content: 500 mL, Bottle TOPRING Swivel Plug, Nominal Size: 1/4 in, MNPT Connection, Steel This 1/4 in Series hose coupler kit is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
Stanley HREPAIR-38 Hose Splice Kit Tru-Flate 21-605 Barb Air Line Swivel Stanley TEE-14F Tee Fitting
HOSE SPLICE KIT 3/8IN
Our Price: $12.19
"Kit Includes: (1) 1/4"" MPT x barbed hose splicer for 3/8"" hose; (1) barb x barb hose splicer for 3/8"" hose & (3) Clamps." Eliminates kinked and twisted air line hose by swiveling a full 360 deg. Use on air lines, tools and compressor connections to increase flexibility and convenience. Barb type and male/female connections. 150 psi maximum working pressure. Use this tee fitting 1/4 in NPT female thread for joining pipes of varying diameters or for changing the direction a pipe runs. Depend on this tee fitting 1/4 in female thread for strength and durability.
KIT COUPLER COMPR 1/4IN 4PC   Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck OIL LUBE CRDLSS 4OZ PASLODE
TOPRING Hose Connection Kit, Nominal Size: 1/4 in, 150 psi, Brass, Includes: (1) 1/4 in FNPT Coupler, (1) 1/4 in FNPT Plug, (1) 1/4 in MNPT Plug, (1) 1/4 in MNPT Hexagonal Nipple Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Paslode Lubrication Oil, Cordless Nailer, Net Content: 4 oz, Bottle, Liquid, Odor/Scent: Mild Petroleum, Amber, Compositions: Mineral Oil, Vegetable Oil, Flash Point: 320 deg F, Relative Density: 0.95