|
|
|
|
|
|
|
|
|
|
|
8 in cleat with large tie off area. Mounts with two screws (Not included).
|
Hot dipped galvanized joist. 2-3/4 in x 5 in x 1/8 in.
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
Reinforces and supports frame.
|
Galvanized steel cleat. 8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 10000 Inside Corner, Mounting Hole Size: 7/16 x 3/4 in, Dimensions: 6 in L x 5 in W x 1/8 in Thick, Galvanized, Suitable for: Stationary Dock with #10003 or #10010 Back Plate
|
Hot-dipped galvanized for long life. Includes enough screws and washers to attach 3 Playstar marine dock floats to frames. Contains twelve 3/8 in x 2 in lag screws and twelve 3/8 in flat washers.
|
3 in heavy-duty ring. Hot dipped galvanized for long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
World Famous Rescue Throw Bag, Line Length: 50 ft, Housing Material: Nylon, Orange
|
6 in flip-up cleat. Cast aluminum.
|
6 in flip-up cleat. Cast aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 13300 Inside Corner, Mounting Hole Size: 9/16 x 1 in, Dimensions: 6 in L x 5 in W x 1/4 in Thick, Galvanized, Suitable for: Floating Dock with 13300-03 or 13300-04 Back Plate
|
Securely attaches stationary and roll in docks. Hot dipped galvanized for long life.
|
Hot dipped galvanized for long life. Includes fasteners for use with Playstar's framing kits, hinge kits and pipe sleeves. Contains twelve 3/8 in-16 x 3 in carriage bolts, twelve 3/8 in flat washers, twelve 3/8 in lock washers and twelve 3/8 in nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.
|
Hot dipped galvanized for long life. Prevents twisting and bending.
|
Inflatable. For use on boats. Protects all sizes of boats.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot dipped galvanized hinge. 3-1/2 in x 5 in x 3/16 in.
|
World Famous Boat, 1 Person, PVC, Beige/Green, 60 in L, 40 in W, Includes: Repair Kit, Tow Rope
|
Hot dipped galvanized for long life. Securely ties frame together.
|
|
|
|
|
|
|
|
|
|
|
|
|
Easily and securely, anchors dock pipe to bottom. One-piece, heavy-duty cast iron construction securely fastens to pipe with single stainless steel nut and bolt. Hot-dipped galvanized for long life. Use with #PS1080 Commercial-grade pipe sleeve. For use with 1-5/8 in OD and 1-7/8 in OD dock pipe.
|
Protects the side and top of the dock with 1-1/4 in cushion above dock level. Solid flaps attach easily to any dock. Excellent cushioning protects boat and dock from each other. Color is permanently molded into the vinyl and will not transfer to the hull.
|
Industrial, heavy-duty gauge 5 in x 5 in x 1/4 in. Used to connect two floating docks together.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for boats up to 12 m. Non-flammable, no CFC's. Good for over 80 blasts. Ideal for marine safety sporting events.
|
World Famous Inflatable Boat Kit, Vinyl, Includes: Two-Person Boat , Oar Set and Pump
|
Holds dock in place while accommodating changing water levels. Two-piece construction allows pipe to be left in water if dock is removed. Removable insert for various pipe sizes. Accommodates standard 1-5/8 in and 1-7/8 in. O.D. SCH 40 pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows modular connections for working with smaller, lighter dock sections. Connects floating sections together quickly and easily with clevis pin of male/female assembly that bolts to frame kit hole pattern or wherever desired with #PS1135 hardware kit. Heavy-gauge, hot-dipped galvanized steel for long life. Includes male clevis, female clevis and clevis pin with clip.
|
Fits Playstar commercial-grade and standard pipe sleeves. Easily adjusts without removal.
|
Makes installation and removal of your dock easy with less effort. 23 in Dia wheel with 1-5/8 in Dia hub. For use with dock axle kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Excellent impact-resistant marine dock float, stable, safe and maintenance-free with large surface area and low center of gravity.
|
Highly polished and anodized. 4 ft wide steps. For floating or stationary docks. Detachable steps for wintertime. Stainless steel hardware. Compatible with flip-up kit to raise it out of the water when needed. Allows step additions.
|
Resin dock ladder with hot-dipped galvanized mounting brackets and hardware. Adjusts to 4-step (36 ft) or 5-step (47 ft) to fit your application. 20 ft extra wide opening. Will not crack, fade or rust. No sharp edge. Stays cool to the touch. Easy-to-install. Tall arch design for stable climbing. Ergonomic hand rails for secure no-slip grip. Deep steps with ribbed surface ensures traction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Builds 4 ft x 10 ft wood dock frame. Heavy-duty, hot dipped galvanized components securely ties 2 ft x 6 ft wood frame together for stationary, roll in or floating dock sections. (Lumber, screws and components sold separately).
|
Ten 2 ft x 2 ft interlocking panels for a 4 ft x 10 ft dock section. Maintenance-free with slip-resistant surface. Use with commercial-grade or aluminum dock frame kits.
|
Everything included to assemble a 4 x 10 ft aluminum dock frame. Sleek design is made with a strong tempered alloy. Lightweight and durable; each section weighs less than 200 lb and carries a full 15 years warranty. Can be built as stationary, roll in or floating. Combine with resin dock top for quick assembly.
|
|