|
|
|
|
|
|
|
|
|
|
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.
|
Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris and animals out of the venting system.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to adjust and balance airflow in individual runs of round pipe.
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
Homerite System 636 Pipe Tee, Nominal Size: 2 in, Hub Connection, Operating Temperature: 65 deg C, PVC
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
6 in A collar, small end collar with crimp.
|
Imperial Chimney Thimble, 28 ga, Galvanized, 6 x 6 in Dimensions, For: Tee Branch and Chimney Section
|
|
|
|
|
|
|
|
|
|
|
|
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.
|
Imperial Angle Boot, 90 deg, Steel, Galvanized, 3 in L, 10 in W, 6 in H
|
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Chimney Thimble, 28 ga, Galvanized, 7 x 6 in Dimensions, For: Tee Branch and Chimney Section
|
Imperial Connector Union, 6 in Union, Round Duct, Galvanized Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
The condensate drain kit is designed to be used with a tee in the exhaust vent line to drain condensate through 1/2 in solid PVC pipe or flexible tubing.
|
Imperial Connector Union, 4 in Union, Galvanized Steel, 4 in L x 4 in W x 4 in H Dimensions
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Connector Union, 5 in Union, Galvanized Steel, 5 in L x 5 in W x 4 in H Dimensions
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
Imperial Corrugated Elbow, 5 in, 28 ga, Galvanized
|
Imperial End Cap, 30 ga, Galvanized Steel, 3 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Ceiling Boot, Steel, Galvanized, 4 in L, 10 in W, 5 in H
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Round to Oval Boot, 90 deg, 30 ga, Galvanized, 6 in L, 6 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
An elbow is installed when a change of direction is needed in a vent line. The 90 deg elbow is a long radius elbow to reduce the restriction on airflow in the exhaust or intake line.
|
Imperial Straight Boot, 30 ga, Galvanized, 6 in L, 6 in W
|
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Furnace Short Increaser, 3 to 4 in, Galvanized, 24 ga
|
Homerite System 636 Pipe Tee, Nominal Size: 3 x 1-1/2 in, Hub Connection, Operating Temperature: 65 deg C, Schedule Rating: SCH 40, PVC
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Corrugated Elbow, 6 in, 28 ga, Galvanized
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Furnace Short Increaser, 6 to 7 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Rain Cap, Square, 30 ga Thick, 3 in Dia, Galvanized Steel
|
Imperial Furnace Short Increaser, 4 to 5 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Used to change the horizontal direction of two sections of rectangular stack duct. 30 ga.
|
Imperial Round End Cap, Galvanized, 6 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
IPEX Cement, Net Content: 473 mL, Liquid, Gray, Odor/Scent: Ketone, Compositions: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone, VOC Content: <510 g/L, Flash Point: -4 deg F, Boiling Point: 151 deg F, Flammability Rating: 3, Density: >2, Specific Gravity: 0.9611, Applicable Materials: PVC
|
Imperial Wall Register Boot, Galvanized, 3 in L, 10 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
|
Used to increase diameter of galvanized round perimeter pipe.
|
Imperial Furnace Short Increaser, 5 to 6 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial End Cap, Material Gauge: 30 ga, Galvanized, 4 in Dia
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Oval Stack Head, 30 ga, Galvanized, 6 in L, 10 in W, 6 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Furnace Short Increaser, 3 to 4 in, Galvanized, 30 ga
|
Imperial Rain Cap, Square, 30 ga Thick, 4 in Dia, Galvanized Steel
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Reducer, 4 x 3 in, 26 ga Thick Wall, Galvanized
|
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Round End Cap, 5 in, Galvanized, 30 ga Thick Wall
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Furnace Short Increaser, 4 to 5 in, Galvanized, 30 ga
|
Imperial Round End Cap, Galvanized, 7 in Dia
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Furnace Short Increaser, 5 to 6 in, Galvanized, 30 ga
|
Imperial Joist Lining, 30 ga, Galvanized, 36 in L, 16 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Furnace Short Increaser, 7 to 8 in, Galvanized, 28 ga
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
Imperial Round End Cap, Galvanized, 6 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial End Boot, 90 deg, Steel, Galvanized, 3-1/4 in L, 10 in W, 6 in H
|
Imperial Furnace Short Increaser, 6 to 7 in, Galvanized, 28 ga
|
Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 6 in OD, 10 ft L, For: Ventilation and Air-Conditioning Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
Imperial Furnace Short Increaser, 6 to 8 in, Galvanized, 24 ga
|
Imperial Furnace Short Increaser, 7 to 8 in, Galvanized, 24 ga
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable 4 piece elbow. Adjusts from straight through 90 deg.
|
Imperial Stove Pipe Reducer, 5 x 4 in, 26 ga Thick Wall, Galvanized
|
Imperial Rain Cap, Square, 30 ga Thick, 5 in Dia, Galvanized Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
|
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
|
Imperial Stove Pipe Reducer, 7 x 6 in, 26 ga Thick Wall, Galvanized, Black
|
|