Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS
Choose a sub category:
JOIST HANGERS FRAMING ANGLES/ANCHORS MENDING PLATES
NAIL PLATES POST ANCHORS / CAPS FENCE BRACKETS
BRIDGING STRAPS PLYWOOD CLIPS
FOUNDATION ANCHORS BRICK/WALL TIES MISC CONSTR HARDWARE
Sort By:
Page of 3
RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie TIE HURR 18GA 6IN GALV        TIE STRAP NO9GALV 20GA
RH Tamlyn Brick Wall Tie, Corrugated, Straight, Series: BT, 6-3/8 in Length, 0.029 in Thickness, Nail Fastener, 8d X 2-1/2 in Fastener, 1370 lb Load Capacity, 7/8 in Width, 22 ga Steel, ASTM A153, Hot Dip Galvanized, Grade: B3, Used on Wood Stud Construction The Hurricane Tie series features various configurations of wind and seismic ties for trusses and rafters. Straps are designed to transfer tension loads in a wide variety of applications. LSTA straps are designed for use on the edge of 2x members with a nailing diaphragm decking and wood chord open web trusses. Meets IAPMO UES ER-102, 124, ICC-ES-ESR-2105, 2523, 3096, L.A. City RR25713, 25489, 25910 and FL10852, 13872.
USP Lumber JL26IF-TZ Standard Invert Flange Joist Hanger TIE STRAP NO12GALV 20GA       USP Lumber PCP Post Cap
USP Lumber Joist Hanger, Standard, Invert Flange, Series: JL, Face Mount, 2 X 6 in, 18 ga Thickness, 695 - 830 lb Load Capacity, Carrying Member Fastener: (6) 10d HDG Nail, Carried Member Fastener: (6) 10d X 1-1/2 in Hot Dip Galvanized Nail, Steel, Galvanized, 4-1/2 in Length, 1-9/16 in Width, 1-1/2 in Height 20-gauge. USP Lumber Post Cap, Series: PCP, 4 X 4 in Post/Joist, Nail Fastener, 8d/10d Fastener, High-Impact Plastic, Gray
STRAP TIE GALVANIZED 20GA     USP Lumber PC12-BMC Plywood Clip HNGR JOIST 2X8IN 18GA GALV
20-gauge. USP Lumber Plywood Clip, Series: PC, 1/2 in Thickness, 20 ga Steel, Galvanized, Grade: G90 Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 8 in, 18 ga Thickness, 1620 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 16d Nail, Steel, Galvanized, 4-5/8 in Width, 6-1/4 in Height, ICC ES
HANGER JST TPL SHR 18GA 2X8IN L-ANGLE  ADJUSTABLE 5IN 18GA  USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger
Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 8 in, 18 ga Thickness, 1620 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 16d Nail, Steel, Galvanized, 6-5/8 in Width, ICC ES Simpson Strong-tie Adjustable L-Angle, 4-7/8 in Length, 3-1/4 in Width, 5 in Height, 8 Mounting Holes, 10 in Dia Mounting Hole, Steel, 18 ga, Galvanized USP Lumber Joint Hanger, Double Shear, Slant, USP Lumber, Face Mount, 18 ga Thickness, 1800 lb Floor Load Capacity, 45 deg Skew, 30 - 45 deg Skew Range, Carrying Member Fastener: (4) 16d Nails, Carried Member Fastener: (8) 16d Nails, Steel, Triple Zinc Plated, 2 in Length, 3-1/8 in Width, 10 in Height, ICC-ES, ESR-1881, FL821
TIE STRINGER ADJUSTABLE 18GA  HNGR ADJ GALV 2X6IN 18GA      6650 1-1/2IN X 3IN PLATE WOOD
The LSCZ connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim joist while replacing costly framing. It is field slopeable to all common stair stringer pitches and is suitable for either solid or notched stringers. The LSCZ installs with hot-dipped galvanized nails or our new Strong-Drive SD screws, has a ZMAX coating for additional corrosion protection, and can be used in interior and some exterior applications, such as decks. Simpson Strong-tie U Joist Hanger, Series: LSU, Light Adjustable, Skewed/Sloped, Face Mount, 2 x 6 in, 18 ga Thickness, 800 lb, 45 deg Skew, Carrying Member Fastener Type: (5) 10d X 1-1/2 in Nail, Steel, Galvanized, 1-9/16 in Width, 4-7/8 in Height, ICC ES Protector plate. Meets requirement of CEC rule 12-616.?
CLP SHEATHING 7/16IN STL      BRACKET SADDLE DECO 4IN BLACK CLP SHEATHING 1/2IN STL
Steel panel sheathing clip.(Emballage de  50 ) Decorative saddle bracket blk. Steel panel sheathing clip.(Emballage de  50 )
STRIP DCK FRAME WTRPF 3INX72FT SADDLE 4X4IN GALV CARPORT     EXTENSION FOR AJUST PYLEX 24IN
Pylex Waterproof Strip, Deck Frame, Suitable For Use With: Simple Joist, 72 ft Length X 3 in Width, Standard Tarred Roof Paper, Black, 72 ft Length X 3 in Width Carport saddle with rebar centre.  Hot galvanized. Adjustable extension for Pylex, turns the Pylex stake from 50" to 72". Allows the installation of the stake deeper when the situation requires, for example in case of excessive frost, soiling near the facility, surface soil compaction insufficient.
SPIKE GROUND ECOSPIKE         HNGR JOIST 16GA 2X10IN        BRACKET SADDLE DECO 6IN BLACK
Ecospike Ground Spike, 3-1/2 x 3-1/2 in Column/Post, Steel, Baked Powder-Coated, Khaki, 32 in Overall Height, For Less Than 60 in High Fence, Mailboxes , Signs Simpson Strong-tie Joist Hanger, Series: SUR, Skewed Right, Face Mount, 2 x 10 in, 16 ga Thickness, 1440 lb, 45 deg Skew, 40 - 50 deg Skew Angle Range, Carrying Member Fastener Type: (10) 10d X 1-1/2 in Nail, Steel, Galvanized, 1-9/16 in Width, 8-1/8 in Height Decorative saddle bracket blk.
HNGR JOIST 16GA 2X10IN        STRIP FRM WTHRPRF 4-1/2INX72FT CLIP RAFTER 2IN
CLIP RAFTER 2IN
Our Price: $19.09
Simpson Strong-tie Joist Hanger, Series: SUL, Skewed Left, Face Mount, 2 x 10 in, 16 ga Thickness, 1440 lb, 45 deg Skew, 40 - 50 deg Skew Angle Range, Carrying Member Fastener Type: (10) 10d X 1-1/2 in Nail, Steel, Galvanized, 1-9/16 in Width, 8-1/8 in Height
CLIP RAFTER 2IN               CLP PLYWD 20GA 3/8IN 250/BG   CLP PLYWD 20GA 7/16IN 250/BG
CLIP RAFTER 2IN
Our Price: $19.09
250 per package. 250 per package.
CLP PLYWD 20GA 1/2IN 250/BG   SPIKE DECK ADJUSTABLE 44      POST ANCHOR DCK SCREWABLE 50IN
ADJUSTABLE SPYTEKDECK 44
Our Price: $24.79
250 per package. Deck spike with adjustable head for square 3-1/2" x 3-1/2" post.  Offers exclusive anchor hook stabilizing system to allow the pole to return to it's initial position when the ground thaws.  Khaki finish. Pylex Screwable Deck, 3-1/2 in Column/Post, 6 in Base Width, 50 in Base Height, 1/8 in Material Thickness, 42 in Minimum Embedment Depth, 5000 lb Load Capacity, Steel, Baked Powder Coating, For All Types of terrain and resists Ground movements
Deckmate 90166 Deck Bench Bracket with Bench Bracket SUPPORTS POST TO BEAM 6IN     SUPPORTS POST TO BEAM 6IN
SUPPORTS POST TO BEAM 6IN
Our Price: $27.39
SUPPORTS POST TO BEAM 6IN
Our Price: $27.39
Deckmate Deck Bench Bracket, 2 X 4 in, 2 X 6 in Post/Joist, Structural Resin, Sand, With Bench Bracket, Hardware and Instructions
CLP PLYWD 20GA 5/8IN 250/BG   USP Lumber HPAHD22 Foundation Strap BRACKET BENCH STEEL BLACK
250 per package. USP Lumber Foundation Strap, Series: HPAHD, 24-3/4 in Length, 9-1/2 in Minimum Embedment Depth, (23) Nail Fastener, 16d Fastener, 2635 lb Uplift Load Capacity, 2-1/16 in Width, 4-1/8 in Depth, 10 ga Steel, Galvanized, Grade: G90, 6 in Stem Wall Thickness Pylex Bench Bracket, Suitable For Use With: All Styles of Terraces, Steel, Baked Powder Coated, Black, For Patio, Balcony, or Quay so as to improve Outside Areas
USP Lumber SFP30 Fence Post Connector USP Lumber RS22-R Coiled Strap RH Tamlyn PCS716 Plywood Clip
USP Lumber Fence Post Connector, Series: SFP, 6 ft Length, 4 X 4 in Post/Joist, Steel, Painted USP Lumber Coiled Strap, Series: RS, 25 ft Roll Length, Nail Fastener, 10d, 8d Fastener, 925 lb Load Capacity, 1-1/4 in Width, 22 ga Steel, Galvanized, Grade: G90 RH Tamlyn Plywood Clip, Series: PCS, 7/16 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction
RH Tamlyn PCS12 Plywood Clip ANCHOR POST DECK ADJ 50IN     RH Tamlyn PCS1532 Plywood Clip
RH Tamlyn Plywood Clip, Series: PCS, 1/2 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction Pylex Adjustable Deck, 3-1/2 in Column/Post, 6 in Base Width, 50 in Base Height, 1/8 in Material Thickness, 5000 lb in Sandy Soil, 3500 lb in Clay Soil Load Capacity, Steel, Baked Powder Coating, Kaki RH Tamlyn Plywood Clip, Series: PCS, 15/32 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction
RH Tamlyn PCS58 Plywood Clip SPIKE HEAVY DUTY 4X4IN        BRACKET FENCE ZINC 2X4IN
HEAVY DUTY SPIKE 44
Our Price: $39.89
RH Tamlyn Plywood Clip, Series: PCS, 5/8 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction Heavy duty spike for dressed 4" x 4" square post.  Application: decks, fences, mailboxes, signs, etc.  ACQ Compatible. FB fence brackets make the connection between fence rails and posts simple and strong.? eliminates the need for toe nailing or screwing.? clean, versatile connections make planning and building fences, deck/porch railings and louvers easier and faster.
USP Lumber RS16-R Coiled Strap POST BASE CONCEALED 6X6 POST  Hopkins 90128 Shelf Link 4 ft L x 2 ft W
USP Lumber Coiled Strap, Series: RS, 25 ft Roll Length, Nail Fastener, 10d, 8d Fastener, 1730 lb Load Capacity, 1-1/4 in Width, 16 ga Steel, Galvanized, Grade: G90 Hopkins Shelf Link, 4 ft Length, 2 ft Width, Includes: Shelflinks, Hardware and Instructions
SCREW FOUNDATION/L-ANCHOR STL USP Lumber BL Corner Brace TIE STRAP 6X6X1-1/2IN 14GA
PYLEX-L SCREW FOR FENCE
Our Price: $57.29
Steel foundation screw. Increase solidity and make fence assembling & installation faster & easier. Its design ensures stability against frost heaving, because its bearing disc is more than 42" in the ground. Its special powder coating finish provides an USP Lumber Corner Brace, Multi-Purpose, USP Lumber, Series: BL, 3-1/16 in Length, 12 ga Thickness, (8) Nails Fastener, 16d Fastener, 1-1/4 in Width, Steel, Galvanized, Grade: G90, Used to Provide Reinforcement for 90 deg Wood-to-Wood Connections General reinforcing.  14-gauge.  Size: 6" H x 6" L x 1-1/2" W.
HNGR JOIST DBL 2X8IN 18GA GALV USP Lumber JL24 Standard Joist Hanger USP Lumber JL26 Standard Joist Hanger
Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 8 in, 18 ga Thickness, 1620 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 16d Nail, Steel, Galvanized, 3-1/8 in Width, 7 in Height, ICC ES USP Lumber Joist Hanger, Standard, Series: JL, Face Mount, 2 X 4 - 6 in, 20 ga Thickness, 455 lb Load Capacity, Carrying Member Fastener: (4) 10d Nail, Carried Member Fastener: (2) 10d X 1-1/2 in Nail, Steel, Galvanized, 3 in Length, 1-9/16 in Width, 15/16 in Height USP Lumber Joist Hanger, Standard, Series: JL, Face Mount, 2 X 6 - 8 in, 20 ga Thickness, 685 - 815 lb Load Capacity, Carrying Member Fastener: (4) 10d Nail, Carried Member Fastener: (4) 10d Nail, Steel, Galvanized, 4-13/16 in Length, 1-9/16 in Width, 1-3/4 in Height
HNGR JOIST DBL 2X8IN 18GA GALV USP Lumber RT7 Double Plate Hurricane/Seismic Anchor TIE PLATE HEAVY 3 X 7IN ZMAX
Simpson Strong-tie Joist Hanger, Standard, Double, Face Mount, 2 x 8 in, 18 ga Thickness, Steel, Galvanized, 1-1/2 in Length, 1-9/16 in Width, 6-3/8 in Height USP Lumber Hurricane/Seismic Anchor, Double Plate, Series: RT, 5-1/4 in Length, (5) Nail Fastener, 8d Fastener, 585 lb Uplift Douglas Fir Load Capacity, 1-9/16 in Width, 18 ga Steel, Galvanized, Grade: G90
HNGR JOIST 18GA 2X10IN GALV   Simpson Strong-Tie LSTA Light Duty Strap Tie BS PST 6X6IN 18GA Z MAX
Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 10 in, 18 ga Thickness, 2260 lb, 45 deg Skew, Carrying Member Fastener Type: (6) 16d Nail, Steel, Galvanized, 3-1/8 in Width, 9 in Height, ICC ES Simpson Strong-Tie Strap Tie, Light Duty, Simpson Strong-Tie, Series: LSTA, 9 in Length, 20 ga Thickness, 1-1/2 in Post/Joist, (8) Nails Fastener, 10d Fastener, 740 lb Uplift Douglas Fir Lumber/Southern Pine Load Capacity, 1-1/4 in Width, Steel, Hot Dip Galvanized, Grade: G90, For 1/2 in W Framing Members, Including I-Joist Flanges The BC series offer dual purpose post cap/base for light cap or base connections.  Double shear nailing between beam and post gives added strength
TIE STRAP 5X6X1-1/2IN 14GA    ANGLE L-MED ZMAX 2X2X4IN 18GA HNGR JOIST 2X10IN 22GA GALV
General reinforcing.  14-gauge.  Size: 5" H x 6" L x 1-1/2" W Simpson Strong-tie Medium L-Angle, 4 in Length, 2 in Width, 2 in Height, 6 Mounting Holes, 1/4 x 1-1/2 in Mounting Hole, Steel, 12 ga, Galvanized Simpson Strong-tie Joist Hanger, Standard, Face Mount, 2 x 10 in, 22 ga Thickness, Steel, Galvanized, 1-1/2 in Length, 1-9/16 in Width, 7-13/16 in Height
HANGER JOIST 18GA 2X6IN       USP Lumber JL210 Standard Joist Hanger HANGER JST DBL SHR 18GA 2X8IN
Simpson Strong-tie Joist Hanger, Standard, Face Mount, 2 x 6 in, 18 ga Thickness, Steel, Galvanized, 1-3/4 in Length, 1-9/16 in Width, 4-3/4 in Height, For End of Ledger/ Header or Post Conditions, The Lucz also Provides Cleaner Lines For Exposed Conditions Such as Overhead Decks USP Lumber Joist Hanger, Standard, Series: JL, Face Mount, 2 X 10 - 12 X 14 in, 20 ga Thickness, 1595 lb Load Capacity, Carrying Member Fastener: (14) 10d Nail, Carried Member Fastener: (8) 10d X 1-1/2 in Nail, Steel, Galvanized, 8-1/4 in Length, 1-9/16 in Width, 1-1/2 in Height Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 8 in, 18 ga Thickness, 1365 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 10d Nail, Steel, Galvanized, 3.563 in Width, ICC ES
RCPS3.5HDG 4X4 CARPORT SADDLE USP Lumber RT7A Double Plate Hurricane/Seismic Anchor USP Lumber JL28 Standard Joist Hanger
Carport saddle with rebar centre.  Hot galvanized. USP Lumber Hurricane/Seismic Anchor, Double Plate, Series: RT, 6-1/2 in Length, (5) Nail Fastener, 8d Fastener, 670 lb Uplift Douglas Fir Load Capacity, 1-1/2 in Width, 18 ga Steel, Galvanized, Grade: G90 USP Lumber Joist Hanger, Standard, Series: JL, Face Mount, 2 X 8 - 10 in, 20 ga Thickness, 1140 lb Load Capacity, Carrying Member Fastener: (10) 10d Nail, Carried Member Fastener: (6) 10d X 1-1/2 in Nail, Steel, Galvanized, 6-3/8 in Length, 1-9/16 in Width, 1-1/2 in Height
Hopkins 90158 Workbench Kit Hopkins 90110 Comfortable Flip Top Bench Table USP Lumber RT Hurricane/Seismic Anchor
Hopkins Workbench Kit, Includes: (4) Legs, Hardware, Instructions, Structural Resin, Black Hopkins Flip Top Bench Table, Comfortable, Sturdy, 8 ft Overall Height, Wood, Sand, Includes: Bench Table Legs, Hardware, Instructions USP Lumber Hurricane/Seismic Anchor, USP Lumber, Series: RT, 6-1/2 in Length, 18 ga Thickness, (5) Truss/Rafter, (5) Plate Fastener, 8d Fastener, 1262 lb Uplift Douglas Fir Lumber Load Capacity, 1-1/2 in Width, 1-1/2 in Depth, Steel, ASTM A653 MaterialSpecification, Triple Zinc Plated, Grade: G185
USP Lumber MP34 Framing Angle USP Lumber JA1-TZ Framing Angle PLT MENDING 1X4IN 20GA GALV
USP Lumber Framing Angle, Multi-Purpose, Fasteners: (4) 8d X 1-1/2 in Nail Header, (4) 8d X 1-1/2 in Nail Joist, 380 lb Douglas Fir Load Capacity, 2-13/16 in Length, 1-1/2 in Width, Stainless Steel, Galvanized, Without Tabs USP Lumber Framing Angle, USP Lumber, 1-1/4 in Length, 16 ga Thickness, (2) Header, (2) Joist Fastener, 10d X 1-1/2 in Fastener, 345 lb Douglas Fir Lumber/Southern Pine Load Capacity, 1-1/2 in Width, 1-1/2 in Depth, Steel, ASTM A653 MaterialSpecification, Triple Zinc Plated, Grade: G185 20-gauge.  Galvanized.
USP Lumber RT5 Double Plate Hurricane/Seismic Anchor HNGR JOIST 18GA 2X8IN GALV    HNGR JOIST DBL 2X10IN 20GAGALV
USP Lumber Hurricane/Seismic Anchor, Double Plate, Series: RT, 5-1/4 in Length, (4) Nail Fastener, 8d Fastener, 540 lb Uplift Douglas Fir Load Capacity, 1-7/8 in Width, 1-15/16 in Depth, 18 ga Steel, Galvanized, Grade: G90 Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 8 in, 18 ga Thickness, 1365 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 10d Nail, Steel, Galvanized, 1-9/16 in Width, 6-5/8 in Height, ICC ES Simpson Strong-tie Joist Hanger, Standard, Double, Face Mount, 2 x 10 in, 20 ga Thickness, Steel, Galvanized, 1-1/2 in Length, 1-9/16 in Width, 7-13/16 in Height
HNGR DBL SHR FC MNT 18GA 2X6IN HANGER JOIST 18GA 2X10IN      USP Lumber PA(E) 2-Sided Post Anchor
Simpson Strong-tie Joist Hanger, Series: LSU, Double Shear, Face Mount, 2 x 6 in, 18 ga Thickness, 1275 lb, 45 deg Skew, Carrying Member Fastener Type: (4) 16d Nail, Steel, Galvanized, 3-1/8 in Width, 4-15/16 in Height, ICC ES Simpson Strong-tie Joist Hanger, Series: LUC, Light Adjustable, Skewed/Sloped, Face Mount, 2 x 10 in, 18 ga Thickness, 45 deg Skew, Carrying Member Fastener Type: 16d, 10d X 1-1/2 in Nail, Steel, Galvanized, 1-9/16 in Width, 7-3/4 in Height, ICC ES USP Lumber Post Anchor, 2-Sided, USP Lumber, Series: PA(E), 3-1/2 in Length, 18 ga Base, 16 ga Standoff Plate Thickness, 1-5/8 in Minimum Embedment Depth, 4 X 4 in Post/Joist, (1) Anchor Bolt, (6) Nails Fastener, 1/2 in Diameter Bolt, 16d Nail Fastener, 990 lb Uplift Douglas Fir Lumber/Southern Pine Load Capacity, 3-9/16 in Width, 3-1/2 in Depth
KIT BARN SHED/ROOF W/BRKTS GLV USP Lumber RT3A Double Plate Hurricane/Seismic Anchor USP Lumber MPA1 Framing Angle
Barn Roof Shed Kit. ? No angled cuts ? saves time and money! ? One kit builds a shed up to 10 feet, combine kits for a shed up to 22 feet. Lumber not included. USP Lumber Hurricane/Seismic Anchor, Double Plate, Series: RT, 4-1/2 in Length, (4) Nail Fastener, 8d Fastener, 610 lb Uplift Douglas Fir Load Capacity, 1-7/16 in Width, 18 ga Steel, Galvanized, Grade: G90 USP Lumber Framing Angle, Multi-Purpose, Notched, USP Lumber, Series: MPA1, 4-1/2 in Length, 18 ga Thickness, 1-5/16 in Minimum Embedment Depth, (6) Header/Stud, (6) Joist/Plate Fastener, 8d X 1-1/2 in Fastener, 795 lb Douglas Fir Lumber/Southern Pine Load Capacity, 1-1/2 in Width, 1-7/16 in Depth, Steel, ASTM A653 MaterialSpecification
USP Lumber MPA1 Framing Angle HNGR JOIST 22GA 2X4IN         USP Lumber JUS28 Double Shear Slant Joist Hanger
USP Lumber Framing Angle, Multi-Purpose, 18 ga, Fasteners: (6) 8d X 1-1/2 in Nail Header, (6) 8d X 1-1/2 in Nail Joist, 280 lb Douglas Fir Load Capacity, 4-1/2 in Length, 1-1/2 in Width, Steel, Galvanized Simpson Strong-tie Joist Hanger, Standard, Face Mount, 2 x 4 in, 22 ga Thickness, Steel, Galvanized, 1-1/2 in Length, 1-9/16 in Width, 3-1/8 in Height USP Lumber Joist Hanger, Double Shear, Slant, Series: JUS, Face Mount, 2 X 8 in, 18 ga Thickness, 1075 lb Load Capacity, 30 - 45 deg Skew Range, Carrying Member Fastener: (6) 10d Nail, Carried Member Fastener: (4) 10d Nail, Steel, Galvanized, 6-5/8 in Length, 1-9/16 in Width, 1-3/4 in Height